floor nail diameter | Forum

Topic location: Forum home » General » General Palooza Topics
qqqq Aug 11

wood keel should be connected with the grassroots solid, fixed point spacing shall not be greater than 600mm. 5, wool floor and the keel should be 30 ° or 45 ° nail, slit should be 2 ~ 3mm, adjacent to the joints should be staggered. 6, in the keel on the pavement directly on the floor,

the primary and secondary keel spacing should be based on the floor length and width modulus calculation to determine the floor seams should be in the keel on the center line. 7, floor nail length should be 2.5 times the thickness of the board, nail cap should be smashed flat.

Should be fixed from the concave edge of 30 ° angle tilt into the. Hardwood flooring should be the first drilling, the aperture should be slightly smaller than the floor nail diameter. 8, hair floor and floor and the wall should be left between the 8 ~ 10mm gap.

" how to add privacy height to attached to existing fence , cost to replace deck boards because of termites , wood flooring malaysia , cheap plastic solid fencing uk "